All servicesInstant quote

SLA 3D printing

Resin parts with fine detail, smooth surfaces and large build volume. Instant quote.

Materials and limits

Lead times are the ones in the quote tool: 5 days for HP MJF and SLA, 10 days for SLM metal.

SLA

Somos White Resin (ABS-like, Shore D 85)

Minimum wall0.2 mm
Maximum build1650 × 760 × 650 mm
Lead time5 days
ColoursWhite

ABS Strength, Tensile Strength/Modulus: 35/2650MPa, Heat Distortion 45℃/113F: 66PSI

SLA

Somos Black Resin (Shore D 76–86)

Minimum wall0.2 mm
Maximum build1650 × 760 × 650 mm
Lead time5 days
ColoursBlack

ABS Strength, Tensile Strength/Modulus: 48/2678MPa, Heat Distortion 44~57℃/41℃: 0.46/1.8MPa

SLA

Somos Translucent Clear Resin (Shore D 87)

Minimum wall0.5 mm
Maximum build1650 × 760 × 650 mm
Lead time5 days
ColoursNot listed

Tensile Strength/Modulus: 50/2700MPa, Heat distortion 45°C/114°F @ 0.46MPa

SLA

Somos Transparent Clear Resin (Shore D 87)

Minimum wall0.5 mm
Maximum build1650 × 760 × 650 mm
Lead time5 days
ColoursNot listed

Tensile Strength/Modulus: 50/2700MPa, Heat distortion 45°C/114°F @ 0.46MPa

SLA

White/Black Rubber (−10 to 80 °C)

Minimum wallNot listed
Maximum build1650 × 760 × 650 mm
Lead time5 days
ColoursNot listed

-10C to 80C

What it’s good for

SLA cures liquid resin layer by layer. It gives sharp edges, thin features and a smooth surface straight off the machine, and the build volume is large enough for whole enclosures in one piece.

  • Appearance models and fit checks
  • Clear and translucent parts for light pipes, lenses and flow visualisation
  • Rubber-like parts for seals, grips and gaskets
  • Masters for urethane casting

Choosing a resin

White and Black are the ABS-like general-purpose options. The two clear resins need a thicker minimum wall than the opaque ones, and the rubber has no minimum wall listed, so ask us if your design depends on thin sections.

Design notes

  • Compare the minimum wall and maximum build in each card with your CAD before you upload.
  • Painting and polishing are available by request: see finishing.

Message us

Mon–Fri 9am–6pm PT