All servicesInstant quote

Metal 3D printing

SLM stainless steel 316L and aluminum AlSi10Mg. Instant quote.

Materials and limits

Lead times are the ones in the quote tool: 5 days for HP MJF and SLA, 10 days for SLM metal.

SLM metal

Stainless Steel 316L

Minimum wall1 mm
Maximum build320 × 320 × 400 mm
Lead time10 days
ColoursNot listed

Tensile Strength: 590 MPa, Yield Strength: 500 MPa, Tolerance: ± 200μm or 0.2%mm

SLM metal

Aluminum AlSi10Mg

Minimum wall1 mm
Maximum build320 × 320 × 400 mm
Lead time10 days
ColoursNot listed

Tensile Strength: 460 MPa, Yield Strength: 245MPA, Tolerance: ± 200μm or 0.2%mm

What it’s good for

Selective laser melting fuses metal powder into dense parts with geometry that is hard or impossible to machine.

  • Metal prototypes that behave like the final part
  • Brackets, manifolds and fixtures with internal features
  • Low-volume parts where tooling isn’t worth it

Choosing a metal

Stainless Steel 316L is the stronger and more corrosion-resistant of the two. Aluminum AlSi10Mg is lighter. The material cards list the tensile and yield figures from our quote tool.

Design notes

  • The minimum wall is thicker than for plastics, so check it in the card before you upload.
  • Tell us about critical surfaces, threads and tolerances through the contact form. If a feature has to be machined after printing, we also offer CNC machining.

Message us

Mon–Fri 9am–6pm PT